TECH NOTES
This is the Tekin Mini Rage Electronic Speed Control with the TT1201 Mini Rage High Performance Brushless Motor. for 1/18 scale vehicles.
FEATURES: ESC On-board programming Adjustable drag brake and Reverse Brake strength Programmable Reverse lockout and low voltage cutoff Adjustable Throttle and Brake profiles (2 modes with 7 profiles each) Pre-installed Futaba J plug (JR and KO plugs also included) Pre-Installed ON/OFF switch Motor Three wire design with pre-installed 3.5mm bullet connectors Ball bearing-supported Sensorless and brushless 6.8kV with high performance bearings
INCLUDES: Tekin Mini Rage Speed Control - TEKM1100 Tekin Mini Rage Hi Performance Motor - TEKC1201 Three 3" long leads with 3.5mm female bullet connectors installed Two 3.5" long leads (no connector, one black and one red wire) Four 1x1" pieces of double sided tape Two 2.5x5mm hex head motor mounting screws (requires 2mm hex wrench) Two black plastic radio connectors (JR and KO) Three sheets of Tekin logo decals (various colors)
REQUIRES: Installation following the included instructions sheet, battery connectors of modeler's choice, soldering iron and solder
SPECS: ESC Length: 1.72" (44mm) Width: 0.95" (24mm) Height: 0.4" (10mm) Weight: 0.9oz (24.5g) Power: 25A Surge: 60A ON Resistance: 0.0045 Input power (except 8kV motor): 4-12 cells NiCd/NiMH or 2-4 cell LiPo Input power (8kV motor): 4-8 cell NiCd/NiMH or 2-3 cell LiPo Power Wires: 16AWG silicone MOTOR Power: 6.8kV Diameter: 0.79" (20mm) can Diameter: .080" (2mm) shaft Length: 1.3" (33mm) Weight: .9oz (48 grams)
